Simple steps, Perfect milk, Every time

Control Panel Overview

Every button is designed with parents in mind - simple, precise, and easy to use, even in the middle of the night.

Buttons & Functions

Power Button (On / Off)
Turns the warmer on or off. Hold the button for a few seconds to fully shut it down
Mode Selector
Lets you choose what you want to use the warmer for:
  • 37 °C – Warm Milk (gentle and safe for breastmilk or formula)
  • 40 °C – Defrost Milk (slowly defrosts frozen breastmilk or formula)
  • 75 °C – Food Heating (baby food jars and purees)
  • 100 °C – Steam Sterilizer (bottles, nipples, pacifiers)
Increase Temperature (+)
Raises the temperature if you want it warmer than the preset (up to 90 °C)
Decrease Temperature (–)
Lowers the temperature if you want gentler heating (down to 30 °C)
Target Temperature Display
Shows the temperature you have selected
Current Temperature Display
Shows the actual water temperature inside the warmer while it’s heating
Fast Function
Designed to speed up warming. It heats milk quickly toward the target temperature and continues heating slightly higher to reduce waiting time
Night Light
A soft light for night feeds. Can be turned on or off at any time without affecting warming

Warming Milk the Smart Way

Which mode should I use?

Is the bottle cold to the touch?
No - it’s near room temperature
Use: Milk Warming
Gentle warming to reach a safe feeding temperature.
  • Mode: Milk Warming
  • Recommended target: 37°C
Yes - just came from the fridge
Use: Fast Function
Faster warming for cold bottles by slightly increasing the temperature.
  • Mode: Fast
  • Recommended target: 37°C

How long does warming take?

The Mine Bottle Warmer is designed to warm bottles quickly. The exact time can vary slightly based on three simple factors:

  • How cold the bottle is
    A fridge-cold bottle needs a bit more time than one at room temperature
  • How much milk is inside
    A fuller bottle takes slightly longer than a small amount
  • The bottle material
    Glass, plastic, and silicone warm at different speeds

About the temperature on the screen
The number shown is the temperature of the water inside the warmer.

The bottle warms by sitting in this water, so it may take a short moment for the milk to fully match the water temperature.

This is normal. Bottles get ready within few minutes - especially when using the Fast function.

Milk Warming Mode

Use this mode when the bottle is near room temperature. Follow the steps below for accurate, gentle warming.

1
Measure the water
Pour around 350 mL of water into the warmer
Why this matters: Using more or less water can lead to incorrect or unstable temperatures
2
Place the bottle
Put the baby bottle inside the warmer after adding the water
3
Choose Milk Warming
Press Milk Warming. The display will show 45°C by default

Use the Decrease temperature button to lower it to 37°C.

37°C is the temperature recommended by breastfeeding specialists
4
Let it start automatically
After setting 37°C, you don’t need to press anything else

The warmer will begin heating automatically after 3 seconds
5
Keeps the temperature once ready
When the water reaches 37°C, the warmer stays turned on to help maintain that temperature

This means you can prepare a bottle before going to sleep and give it directly if your baby wakes up during the night

Fast Mode (for cold bottles)

Use Fast when the bottle is cold (for example, just removed from the fridge). It’s designed to warm faster than normal mode.

1
Add water (same as normal mode)
Pour exactly 350 mL of water into the warmer
Important: Using a different water level can lead to incorrect temperatures
2
Place the bottle
Put the bottle inside the warmer after adding the water
3
Select Fast + set your target
Press Fast, then set the target temperature to 37°C (recommended)

After you set the temperature, the warmer starts automatically after 3 seconds
4
Listen for the beep (target reached)
When Fast mode reaches the target temperature, the warmer will beep
Note: In Fast mode, the warmer will then continue to gradually increase the water temperature to speed up bottle warming. It will hold steady at a maximum of 48°C
After the beep, choose one option:
  • Option A (fastest): Remove the bottle about 3–4 minutes after the beep
  • Option B (most precise): Switch back to Normal Milk Warming Mode so the water returns to 37°C, and keep the bottle inside until it matches 37°C

More Than Just Warming: Defrost, Heat & Sterilize

Defrost (40°C)
For frozen breastmilk or formula - gentle and gradual
Water: ~350 mL
Mode: Defrost
Goal: gentle thaw
1
Add water: Pour about 350 mL into the warmer
2
Place the bottle/bag: Put your frozen milk container inside (bottle or storage bag)
3
Select Defrost (40°C): The warmer will thaw slowly to protect the milk
Tip: Defrost is meant to be gentle - it warms gradually instead of rushing the process
Heat Food (75°C)
For baby food jars, purees, and small containers
Water: ~350 mL
Mode: Food
Use: jars & purees
1
Add water: Pour about 350 mL into the warmer
2
Place the food container: Jar or bowl inside the warmer
3
Select Food Mode (75°C): Heats evenly for a smooth, warm meal
Good to know: The warmer may rise slightly above the setting to speed up heating, then stabilizes
Steam Sterilize (100°C)
For bottles, nipples, pacifiers, and small baby items
Water: 100–150 mL
Mode: Steam
Goal: sterilize
1
Add a small amount of water: Pour only 100–150 mL (enough to create steam)
2
Place items inside: Bottles, nipples, pacifiers, or small items (clean first)
3
Select Steam (100°C): The warmer will generate steam for sterilizing
4
Set time (minutes): Choose the duration you want.
Safety: Steam is hot. Let items cool briefly before removing them